? available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model XDL15-2-020S rev b delay line description the XDL15-2-020S can be used in amplifier linearization applications from 0.3 ? 2.7 ghz. small form factor of XDL15-2-020S is ideal for cascading to obtain longer delay. the xinger? delay lines are a low cost, high quality alternative to the traditional coaxial and filter solutions presently available. parts have been subjected to rigorous qualification testing and units are 100% tested. produced with 6 of 6 rohs compliant tin immersion finish. electrical specifications* features: ? ? production friendly ? consistent delay ? stable over temperature ? surface mountable ? available in tape & reel ? non-lead solder paste compatible ? lead free ? 100% tested frequency (mhz.) return loss (db) (min) insertion loss per ns (db/ns) group delay (ns) 300 -2000 -17 -0.9 2.01 0.17 2000-2700 -14 -1.1 2.20 0.20 * specification based on performance of unit prop erly installed on anaren test board 66111-0001. * specifications subject to c hange without notice. refer to parameter definitions for details. mechanical outline orientation mark denotes pin 1 .400 .010 [10.16 0.25 ] .200 .010 [5.08 0.25 ] denotes array number gnd pin 1 nc pin 2 nc nc pin 1 nc pin 2 .066 .013 [1.66 0.34 ] 2x .024 .004 [0.61 0.10 ] 2x .024 .004 [0.61 0.10 ] .120 .004 [3.05 0.10 ] 2x .034 .004 sq [0.86 0.10 ] 2x .034 .004 [0.85 0.10 ] 2x .020 .004 [0.51 0.10 ] dimensions are in inches [millimeters] XDL15-2-020S mechanical outline tolerances are non-cumulative
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 ? available on tape and reel for pick and place manufacturing. model XDL15-2-020S rev b typical performance: 300 mhz to 2700 mhz 300 600 900 1200 1500 1800 2100 2400 2700 -50 -40 -30 -20 -10 0 frequency (mhz) return loss 1(db) return loss 1 XDL15-2-020S (overtemp) -55oc 25oc 95oc 300 600 900 1200 1500 1800 2100 2400 2700 -50 -40 -30 -20 -10 0 frequency (mhz) return loss 2(db) return loss 2 XDL15-2-020S (overtemp) -55oc 25oc 95oc 300 600 900 1200 1500 1800 2100 2400 2700 1 1.5 2 2.5 3 frequency (mhz) group delay(ns) group dealyXDL15-2-020S (overtemp) -55oc 25oc 95oc 300 600 900 1200 1500 1800 2100 2400 2700 -1.5 -1 -0.5 0 frequency (mhz) insertion loss per ns (db/ns) insertion loss per ns XDL15-2-020S (overtemp) -55oc 25oc 95oc cascading XDL15-2-020S if more than 2ns delay is needed, casc ading XDL15-2-020S can provide group delay of 4ns, 6ns and 8ns. please refer to the app-note for the recommend mounting footprin t for cascading the delay. gap of 2mm between the cascaded parts is needed with solder mask in between.
? available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model XDL15-2-020S rev b mounting guidelines: in order for xinger surface mount delay lines to work optimally, there must be 50 ? transmission lines leading to and from all of the rf ports. also, there must be a very good ground plane under the part with a number of plated thru holes to ensure proper electrical performance. if any of these conditions are not satisfied, insertion loss, average delay and vswr may not meet published specifications. when a surface mount delay line is mounted to a printed circuit board (pcb), the primar y concerns are; insuring the rf pads of the device are in contact with the circuit trace of the pcb and the ground plane of neither the component nor the pcb are in contact with the rf signal. an example of how the pcb footprint could look is shown below. in particular designs, the 50 ? lines need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. XDL15-2-020S xx xx .116 [2.95] 2x 50 ? transmission line .307 [7.80] .045 [1.14] to ensure proper electrical and thermal performance there must be a ground plane with 100% solder connection underneath the part orientated as shown with text facing up. r.046 typ [r1.18]
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 ? available on tape and reel for pick and place manufacturing. model XDL15-2-020S rev b packaging and ordering information parts are available in both reel. packaging follows eia 481-2. parts are oriented in tape and reel as shown below. minimum order quantities are 2000 per reel. carrier tape reel
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? XDL15-2-020S
|
